User; Expert; Presentation Of Warning; Safety Instructions - Cornelius Energize Series Manual Operation



1.3.2 User

The operator specifies who will operate this unit. Cornelius recommends the following:

If this unit is only to be operated by employees, they are to be instructed in its use, demonstrate their
abilities to use it to the operator or their authorized representative, and be expressly charged with its
use. This document is to be available to staff at all times.

If this unit is openly accessible and set up so that untrained staff can use it, the operator is to provide
instructions for use directly at the unit; these must be clearly understood by this group of people,
therefore ensuring that the unit will be handled safely.

1.3.3 Expert

An expert in terms of this document refers to someone who has the relevant training, experience and
information and knowledge of relevant standards, laws, regulations, accident prevention regulations,
generally accepted safety-related regulations and operating conditions to be able to perform the required
activities as well as recognise potential risks and avert them.
For assignments requiring expert knowledge, e.g. in electrical engineering, mechanics or fluid technology,
only skilled workers with the right qualifications are to carry these out.
An expert must also have received technical training in the unit-specific special features of Cornelius
products. The assigned tasks are always to be carried out in compliance with this manual.
1.4

Presentation of warning

The documents supplied with the unit provide warnings regarding any hazards that might exist.
1.5

Safety instructions

1.5.1

Safety information to prevent personal injury and equipment damage

Any work on the unit and its components which goes beyond operation and beyond the servicing and
maintenance tasks that the operator is authorized for, may only be performed by experts Furthermore, it is
crucial that when performing work on the unit all safety information is observed; this information is set out in
the following sections. Some of the tasks may have additional safety information which highlights the specific
hazards associated with such work.
1.5.2

Safety information for using electrical assemblies

Danger!
To prevent risks to health and safety, please always observe the following five safety rules:
1. Disconnect from power.
2. Secure against reconnection.
3. Verify that the system is disconnected from power.
4. Ground and short-circuit the system.
5. Cover or separate adjacent live parts.
These five safety rules are to be applied before carrying out work on the electrical system and in the above
stated order. Once work is completed, the safety rules are to be undone again in reverse order.
Cornelius Deutschland GmbH
Document no: TD1005601EN
Version A, 24.09.2019, Index 0
Energize R134a 60Hz
Manual operation undercounter cooler
Energize R134a 60Hz
Page 5