Troubleshooting - U-Line ICE-MAKER User Manual

BEFORE CALLING FOR SERVICE
If the unit appears to be malfunctioning, read through NORMAL OPER-
ATION first. If the problem persists, check the TROUBLESHOOTING
GUIDE. Locate the problem in the guide and refer to the cause and its
remedy before calling for service. The problem could be something very
simple which can be solved without a service call.
TROUBLESHOOTING GUIDE
Troubleshooting — What to check when problems occur
Problem
No interior light
Light won't go out
when door is
closed.
The unit is not
cold enough

TROUBLESHOOTING

!
DANGER
ELECTROCUTION HAZARD
NEVER attempt to repair or perform mainte-
nance on the unit until the main electrical
power has been disconnected.
Possible Cause
Loose or burned out
bulb
Light on/off switch is
turned to ON.
Light staying on
Door gasket not
sealing properly
Item(s) interfering with
door.
Dirty condenser coils
!
Tighten or replace bulb.
See LIGHT BULB
REPLACEMENT.
Turn switch to OFF.
See LIGHT SWITCH AND
BULB.
Adjust door so light switch
bracket contacts switch
plunger. See ALIGNING
THE DOOR.
75 BEV - Make sure the
light switch is in the "OFF"
position.
Adjust door. See
ALIGNING THE DOOR.
Reposition or remove
item(s).
Clean condenser. See
CLEANING AND
MAINTENANCE.
49
Remedy