U-Line ICE-MAKER User Manual page 30

User's Manual
8. Remove pivot screw from top hinge, invert screw and reinstall
pivot screw in top hinge (Figure 28).
RIGHT SIDE
DOOR SWING
PLASTIC
PLUG
HOLE
9. Remove three plastic screw
plugs in hinge holes, top of
cabinet, opposite side. Be
careful not to scratch cabinet
(Figure 29).
Figure 29
10. Place door on lower hinge pin.
Invert and install upper hinge
on door.
HINGE
SCREW
RIGHT SIDE INVERT
HINGE SCREW
Figure 28
UL114A
INVERT
HINGE
11. Fasten upper hinge to unit
(three screws). Partially tight-
en screws until door is aligned
(Figure 30).
Figure 30
28
LEFT SIDE
DOOR SWING
PLASTIC
PLUG
HOLE
UL115
UL119