Table of Contents
Advertisement
D. SECURE BATH
Secure the nailing flange to the stud pocket header with
screws supplied with unit.
After the unit is secured to the header to prevent
spreading or squeezing of bath walls, remove the
shipping spreader bar. Test operation of door to assure
there is no binding from installation.
8. COMPONENT LOCATION
Familiarize yourself with the location of all major
components before proceeding to field wiring (by a
licensed electrician), suction elbow adjustment, trim kit
installation, and testing and troubleshooting.
This unit uses a compressor assembly to inflate a seal
in the door. The door has a backup gasket on the outside
for added safety.
A bolt-type latch secures the door. It is released by the
button on top of the door. After the button is depressed,
slight pressure inward should open the door.
CA
113019-
(1093)
Seat
10
Supplied
Pan Head
Screws
Spacer
Bar
Button
Inflatable
Seal
Door
Back
Up
Gasket
Air Line
Air Compressor
Air Compressor
Control Box
Kohler Co., Kohler WI
Advertisement
Table of Contents
