Oven Restraint Kit; Setup And Initial Operation; Setup; Stacking - TurboChef NGC-1007 Service Manual

4 INSTALLATION, SPECIFICATIONS, AND MAINTENANCE
Oven Restraint Kit (TC3-0242 KIT)
The Oven Restraint Kit is an optional system that
helps prevent the oven from moving forward during
use and/or cleaning. It will not prevent the oven from
falling off a countertop if the legs are allowed to slide
off the edge or if the oven is intentionally or forcefully
pulled off.
Proper installation instructions are included with the
kit. for additional information, please call customer
service at 800.90

SETUP AND INITIAL OPERATION

Setup

Once the oven is properly positioned on the counter,
remove any packing material and/or any foreign
objects from within the cavity. Install the oven rack/
cooking surface.

Stacking

1. Ensure the surface that will hold the stacked
ovens can support at least 400 lbs (181 kg).
2. Allow ovens adequate time to cool and unplug them
3. If you are stacking ovens on a TurboChef oven
cart (24" = NGC-1217-1, 18" = NGC-1217-2),
make sure that the bottom oven is bolted to the cart
and the wheels are locked.
4. Attach the stacking bracket (P/N TC3-0323) to the
back of the bottom oven:
a. Remove the two screws that hold the top
panel to the back of the oven (see bottom
arrows on Figure 4).
b. Align the holes on the stacking bracket with
the holes on the oven and reinstall the screws.
5. Remove the legs of the oven that will be placed on
top. This requires two or more persons - at least
one person to lift and one to unscrew the legs.
6. Remove the screws from the oven that will be
placed on top (see top arrows on Figure 4).
7. Place this oven on top of the other (the one to which
the stacking bracket is attached).
WARNING
with fewer than 2 people.
WARNING
/ +1 214.379.6000 .
TURBO
: Do not attempt to lift the oven
: Do not lift oven from front and back.
8. Align the holes on the bracket with the holes
on the top oven and reinstall the screws.
: Do not stack ovens over two-
WARNING
high.

Programming

The oven is preprogrammed and ready to oper-
ate out of the box.

Initial Power-up

To turn on the oven, press the bottom-right soft
key next to the words
OVEN ON
The oven will begin to warm up to its prede-
fined cooking temperature. This takes approxi-
mately 13 minutes.
When the warm-up cycle is completed, the oven
will beep and display the
4 : Properly Stacked NGC Ovens
F I G U R E
on the display.
.
READY TO COOK