Table of Contents
Advertisement
4
G E N E R A L O V E N I N F O R M AT I O N / I N S TA L L AT I O N
Oven Restraint Kit
Part Number: TC3-0242
WARNING: The Oven Restraint Kit will not
prevent the oven from falling off a countertop
if the oven is pulled off or allowed to slide off
the edge. Installation instructions are included
with the kit.
ChefComm OneTouch
Part Number: CON-7006
ChefComm OneTouch® lets you easily create
menu settings on a computer and upload them
to an oven via USB. For more information, call
TurboChef Customer Support at 800.90TURBO
or +1 214.379.6000.
Open Kitchen
™
Open Kitchen® from Powerhouse Dynamics, a
Middleby company, is an Internet of Things (IoT)
solution used by foodservice operators to connect
and monitor HVAC, refrigeration, and foodservice
cooking equipment, across any brand. This level of
connectivity provides access to real-time data on
food prep and storage, tracks and handles energy
management on HVAC equipment, gives visibility on
important key performance indicators, and empowers
chefs to remotely distribute recipe updates to cooking
equipment, which is a big asset for chains and multi-
location restaurants.
Open Kitchen connectivity is now available as a
bundled option with your newly purchased TurboChef
equipment.
ConnectWare
Connectware® is a versatile, plug-and-play
communications module designed to enable
equipment in restaurants, retailers, and other facilities
to connect to the Cloud. Powerhouse Dynamics
developed ConnectWare to take the burden and
expense of communications support from the OEMs
and provide a consistent yet flexible method that
enables their equipment to communicate.
ConnectWare simply plugs into a factory installed
ConnectWare Dock; no installation required.
ConnectWare supports multiple
communications protocols:
•
Wi-Fi (includes the highly secure Microsoft
Azure Sphere® chipset)
•
Ethernet version also available
•
Plug and play across protocols, making it "future
proof "
Date and Time Prompt (Legacy Only)
The oven maintains a data log that contains
valuable information about the operation of the
oven, including faults, items cooked, and other
events. An accurate date and time are important for
the data log. If the oven loses the date and time as
a result of prolonged disconnection from power, a
prompt will alert the operator to set the date and
time. The prompt will only occur once. If bypassed,
the operator must update the date and time from
the Info Mode Settings screen (see page 25 for
details.)
Registration Prompt (Legacy Only)
At the time the oven is installed, registration
information should be input into the oven
including store number, address, et cetera. This
information is important for warranty tracking
purposes. If registration information is not entered,
you may be prompted by the oven to input the
registration information whenever the oven is
turned on at the start of the day. To eliminate the
prompts, simply fill in the registration information
requested at the prompt screen.
Voltage Selection
For North America oven models, the oven will
detect 208 or 240 incoming voltage.
If incoming voltage for the store is different than
the factory-preset voltage, the operator will be
required to select either 208 or 240. The correct
voltage will be enlarged on the screen, identifying
which option to touch (see Figure 3 below).
Figure 3: Selecting Voltage
ECS-1001 / Rev E / August 2023
Ventilation
The TurboChef ECO ST oven has been approved
by Underwriter's Laboratory for ventless operation
(UL KNLZ listing) for all food items except for
foods classified as "fatty raw proteins." Such foods
include bone-in, skin-on chicken, raw hamburger
meat, raw bacon, raw sausage, steaks, etc. If
cooking these types of foods, consult local HVAC
codes and authorities to ensure compliance with
ventilation requirements.
To ensure continued compliance with all health,
building, and fire codes, you are required to
maintain clean and sanitary conditions around
your oven at all times.
NOTE: In no event shall the manufacturer assume
any liability for damages or injuries resulting from
installations which are not in compliance with the
instructions and codes previously listed. Failure to
comply with these instructions could result in the
issuance of a temporary cease and desist order from
the local health department until the environment
concerns are addressed.
5
ECS-1001 / Rev E / August 2023
Advertisement
Table of Contents
