Key-Operated Ignition Switch Functions; Equipments; Circuit Breaker; Adjustment Of Damper Settings - PEUGEOT TWEET Series Owner's Manual

KEY-OPERATED IGNITION SWITCH
FUNCTIONS
A.Engine off position
The engine is off. Power to the electrical circuit is off. The
key can be removed.
B.On position
Power to the electrical circuit is on. The engine can be
started. The key cannot be removed.
B
A
D
C
C.Steering unlocked
Power to the electrical circuit is off. The handlebars must
be turned to the left, while the key must be
simultaneously pushed in and turned to the left. The key
can be removed.
D.Opening the saddle
Action of the key in this position allows you to open the
saddle with a cable device.

EQUIPMENTS

1

Circuit breaker

LOCK

Adjustment of damper settings

Each damper has an adjuster ring that can be used to
stiffen or soften the suspension, depending on the
vehicle load.
+
Use the on-board tool to make this adjustment.
To guarantee your comfort and safety, always
adjust the damper preload in line with the
vehicle load.
Perform the same setting for the 2
dampers (125/151 cc).
1. Depending on model
Reproduction or translation, even partial, is forbidden without the written consent of Peugeot Scooters
The lateral kickstand is fitted with an ingition cut-out
which prevents the engine from being started while
A switch neutralising the
the stand is down.
ignition circuit is located
in the compartment under
This system reminds the driver to lift the stand before
the saddle.
starting the engine.
LOCK position. The
If the engine starts with the kickstand down, it is essential
engine shall not start.
to have the circuit checked by an approved dealer.
UNLOCK position. The
engine can be started.
Special features 125/151 cc Injection
-
LATERAL STAND
Never unfold the stand to stop the engine,
as this could trigger the malfunction
indicator of the emission control system.
If the indicator light comes on following
this action, switch the ignition on and off 4
times to extinguish it.
FR
GB
DE
IT
ES
NL
GR
SE
PT
FI
DK
11/21