MARUTI SUZUKI EECO Manual page 85

CAUTION
Replacing the original tyres with
tyres of a different size may result in
false speedometer or odometer read-
ings. Check with your Maruti Suzuki
authorised workshop before pur-
chasing replacement tyres that differ
in size from the original tyres.
EXAMPLE
09-65D112A
Tyre Rotation
To avoid uneven wear of your tyres and to
prolong their life, rotate the tyres as illus-
trated. Tyres should be rotated as men-
tioned in periodic maintenance schedule.
After rotation, adjust front and rear tyre
pressures to the specification listed on
your vehicle's Tyre Inflation Pressure
Label.
Wheel Balancing
If the vehicle vibrates abnormally on
smooth road, have the wheel balanced at
Maruti Suzuki authorised workshop.
Wheel Alignment
In case of abnormal tyre wear or pulling
towards one side, have the wheel aligned
Maruti Suzuki authorised workshop.
Tubeless Tyres
The vehicle is equipped with Tubeless
Tyres. In tubeless tyre, a thin layer of butyl
rubber is used for lining the inside of the
tubeless tyre. This layer is to prevent air
loss and fulfilling the purpose of tube. The
air pressure is maintained by the sealing
between tyre bead and wheel rim. Tube-
less tyres are having advantage of slow air
loss and preventing sudden deflation while
driving.
Care and maintenance tips for tubeless
tyres
1) Always maintain recommended infla-
tion pressure. Driving continously at low
inflation pressure can lead to tyre dam-
age.
2) In case any leakage is found, check for
any nail penetration/valve core damage
or rim bent. Damaged wheel must not
be used.
3) In case tyre has run at low pressue, it
must be inspected for any defect.
4) Whenver new tyre is fitted, replace the
valve.
INSPECTION AND MAINTENANCE
5) If continous high speed driving is
required, increase tyres pressure by 5
psi over recommended inflation pres-
sure.
6) Never run the tyre beyond TWI (Tread
wear indicator). The tyre is recom-
mended to be replaced when the
remaining tread has worn to this point.
The indicators are spaced across the
tread around the tyre marked by a tri-
agular symbol (TWI).
7) Always prefer tubeless tyre mounting
machine. In case of manual mounting-
tyre/wheel rim damage may occur.
8) In case of any problem, please get in
touch with Maruti Suzuki authorised
workshop.
EXAMPLE
09-77A066A
76MH1-74E
8-18