Exhaust Gas Warning; Daily Inspection Checklist - MARUTI SUZUKI EECO Manual

Table of Contents

Advertisement

OPERATING YOUR VEHICLE

EXHAUST GAS WARNING

EXAMPLE
06-70G143A
WARNING
Avoid
breathing
exhaust
gases.
Exhaust gases contain carbon mon-
oxide, a potentially lethal gas that is
colourless and odorless. Since car-
bon monoxide is difficult to detect by
itself, be sure to take the following
precautions to help prevent carbon
monoxide from entering your vehicle.
• Do not leave the engine running in
garages or other confined areas.
(Continued)
5-1
WARNING
(Continued)
• Do not park with the engine run-
ning for a long period of time, even
in an open area. If it is necessary to
sit for a short time in a parked vehi-
cle with the engine running, make
sure the air intake lever is set to
"FRESH AIR" and the fan is at high
speed.
• Avoid operating the vehicle with
the rear door open. If it is neces-
sary to operate the vehicle with the
rear door open, make sure all the
windows are closed, and the fan is
at high speed with the air intake
lever set to "FRESH AIR".
• To allow proper operation of your
vehicle's ventilation system, keep
the air inlet grille in front of the
windscreen clear of snow, leaves,
or other obstructions at all times.
• Keep the exhaust tailpipe area clear
of snow and other material to help
reduce the buildup of exhaust
gases under the vehicle. This is
particularly important when parked
in blizzard conditions.
• Have the exhaust system inspected
periodically for damage and leaks.
Any damage or leaks should be
repaired immediately.
DAILY INSPECTION
CHECKLIST
EXAMPLE
06-76A023A
Before driving:
1) Make sure that windshield, windows,
mirrors, lights, and reflectors are clean
and unobstructed.
2) Check the tyres.
3) Look for fluid and oil leaks.
NOTE:
It is normal for water to drip from the air
conditioning system after use.
4) Adjust the seat and head restraint.
(if adjustable)
5) Check the brake pedal and the parking
brake lever.
6) Adjust the mirrors.
7) Make sure that you and passengers
have properly fastened the seat belts.
8) Make sure that all warning lights come
on as the key is turned to the "ON" or
"START" position.
9) Check all gauges.
76MH1-74E

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents