MARUTI SUZUKI EECO Manual page 32

INSTRUMENT PANEL
EXAMPLE
(1) (2) (3) (4)
(8)
Description of Controls
Function selector (1) This selector is used
to select one of the functions described
below:
VENTILATION (2)
Temperature controlled
comes out of the center and
side air outlets.
04-60A102A
BI-LEVEL (3)
Temperature controlled
comes out of the floor outlets
and cooler air comes out of the
04-60A103A
center and side outlets. When
the temperature control lever is
in the fully "COLD" position or
fully "HOT" position, however,
the air from the floor outlets
3-9
RECIRCULATED AIR
(5) (6) (7)
FRESH AIR
(9)
and the air from the center and
side outlets will be the same
temperature.
HEAT (4)
air Temperature controlled
comes out of the floor outlets.
04-60A103A
HEAT & DEMIST (5)
Temperature controlled
air comes out of the floor outlets,
the windscreen demister out-
04-60A105A
lets, and the side demister out-
lets.
DEMIST (6)
Temperature controlled
comes out of the windscreen
04-60A106A
demister outlets and the side
demister outlets.
Air Intake Selector (7)
This selector is used to select between cir-
culating outside air (FRESH AIR) or recir-
culating inside air (RE-CIRCULATED AIR).
Temperature Selector (8)
This selector is used to control the tem-
perature of the air that comes out of the air
outlets.
Blower Speed Selector (9)
This selector is used to turn on the blower
and to select blower speed. There are four
positions: OFF, LOW, MEDIUM, and HIGH.
System Operating Instructions Natural
04-81A027A
Ventilation
Select "VENTILATION", and "FRESH AIR",
the temperature selector to the desired
temperature position, and the blower
speed selector to "OFF". Fresh air will flow
through the vehicle during driving.
air
Forced Ventilation
The control settings are the same as for
natural ventilation except you set the
blower speed selector to a position other
air
than "OFF".
Normal Heating (Using outside air)
Select "HEAT", and "FRESH AIR", the tem-
perature selector to the desired tempera-
ture position, and the blower speed
selector to the desired blower speed posi-
air
tion. Setting the blower speed selector to a
76MH1-74E