Display Hardware Vital Product Data Task; Change Hardware Vital Product Data Task; Add Or Delete Drawer Configuration Task - IBM R/S6000 7012 300 Series Operator's Manual

Display Hardware Vital Product Data
This service aid will display all installed resources along with any VPD for those resources.
Use this service aid when you want to look at the VPD for a specific resource.
Change Hardware Vital Product Data
Use this service aid to display the Display/Alter VPD Selection Menu. The menu lists all
resources installed on the system. When a resource is selected a menu is displayed that
lists all the VPD for that resource.
Note: The user cannot alter the VPD for a specific resource unless it is not machine
readable.
Add or Delete Drawer Configuration
This task provides the following options:
List all Drawers
Add a Drawer
Remove a Drawer
The supported drawer types are:
Media SCSI Device Drawer
DASD SCSI DASD Drawer
Display Software Product Data
This task displays information about the installed software and provides the following
functions:
List Installed Software
List Applied but Not Committed Software Updates
Show Software Installation History
Show Fix (APAR) Installation Status
List Fileset Requisites
List Fileset Dependents
List Files Included in a Fileset
.List File Owner by Fileset
Add Resource to Resource List
Use this task to add resources back to the resource list.
Note: Only resources that were previously detected by the diagnostic and deleted from the
Diagnostic Test List is listed. If no resources are available to be added, then none
are listed.
4-8
Operator Guide