Changing The Logo Position - IBM R/S6000 7012 300 Series Operator's Manual

Changing the Logo Position

There are two logos on most system units: one on the front cover and one on the back
cover. The logos can be turned so they can be read when the system unit is in either a
horizontal or a vertical position.
With the system unit in the vertical position, to change the logos:
1. Grasp the logo with your fingertips.
2. Turn the logo 90 in a clockwise direction on the front cover (counterclockwise direction
on the back cover, if present).
3. Release the logo back into position.
Vertical Position
Vertical Position
Back View
Front View
Logo
Logo
7-5
Changing the System Unit Position