IBM R/S6000 7012 300 Series Operator's Manual page 134

OCS software being configured.
597
OCS hosts being configured during system reboot.
598
Configuring FDDI data link control.
599
Streams-based hardware drive being configured.
5c0
Streams-based X.25 protocol being configured.
5c1
Streams-based X.25 COMIO emulator driver being configured.
5c2
Streams-based X.25 TCP/IP interface driver being configured.
5c3
FCS adapter device driver being configured.
5c4
SCB network device driver for FCS is being configured.
5c5
AIX SNA channel being configured.
5c6
Starting network boot portion of /sbin/rc.boot
600
Configuring network parent devices.
602
/usr/lib/methods/defsys, /usr/lib/methods/cfgsys, or
603
/usr/lib/methods/cfgbus failed.
Configuring physical network boot device.
604
Configuration of physical network boot device failed.
605
Running /usr/sbin/ifconfig on logical network boot device.
606
/usr/sbin/ifconfig failed.
607
Attempting to retrieve the client.info file with tftp. Note that a flashing 608
608
indicates multiple attempt(s) to retrieve the client_info file are occurring.
The client.info file does not exist or it is zero length.
609
Attempting remote mount of NFS file system.
610
Remote mount of the NFS file system failed.
611
Accessing remote files; unconfiguring network boot device.
612
Configuring local paging devices.
614
Configuration of a local paging device failed.
615
Converting from diskless to dataless configuration.
616
Diskless to dataless configuration failed.
617
Configuring remote (NFS) paging devices.
618
Configuration of a remote (NFS) paging device failed.
619
Updating special device files and ODM in permanent filesystem with data
620
from boot RAM filesystem.
Boot process configuring for operating system installation.
622
IBM SCSD disk drive being configured.
650
POWER GXT800M Graphics Adapter
680
4.5GB Ultra SCSI Single Ended Disk Drive being configured.
689
9.1GB Ultra SCSI Single Ended Disk Drive being configured.
690
Eicon ISDN DIVA MCA Adapter for PowerPC Systems.
694
Progress indicator. A 1.1 GB 8-bit SCSI disk drive being identified or
700
configured.
Progress indicator. A 1.1 GB 16-bit SCSI disk drive is being identified or
701
configured.
Progress indicator. A 1.1 GB 16-bit differential SCSI disk drive is being
702
identified or configured.
Progress indicator. A 2.2 GB 8-bit SCSI disk drive is being identified or
703
configured.
Progress indicator. A 2.2 GB 16-bit SCSI disk drive is being identified or
704
configured.
The configuration method for the 2.2 GB 16-bit differential SCSI disk drive is
705
being run. If an irrecoverable error occurs, the system halts.
Progress indicator. A 4.5 GB 16-bit SCSI disk drive is being identified or
706
configured.
Progress indicator. A 4.5 GB 16-bit differential SCSI disk drive is being
707
identified or configured.
Three-Digit Display Numbers
B-7