Rtp, Codec, Dtmf Global Settings - Aastra 480i Administrator's Manual

RTP, Codec, DTMF Global Settings

Parameter –
sip rtp port
RTP Port Base
(in IP Phone UI)
RTP Port
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip use basic codecs
Basic Codecs
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip out-of-band dtmf
Force RFC2833 Out-of-
Band DTMF
(in Web UI)
Description
Format
Default Value
Range
Example
148 IP Phone SIP Admin Guide
IP Phone UI
Aastra Web UI
Configuration Files aastra.cfg, <mac>.cfg
Indicates the port through which the RTP packets are
sent. The RTP port is used for sending DTMF tones
and for the audio stream. Your network administrator
may close some ports for security reasons. You may
want to use this parameter to send RTP data using a
different port.
Integer
3000
Not Applicable
sip rtp port: 5000
Aastra Web UI
Configuration Files aastra.cfg, <mac>.cfg
Enables or disables basic codecs. Enabling this
parameter allows the IP phone to use the basic
Codecs when sending/receiving RTP packets.
Boolean
0
0 - Disable
1 - Enable
sip use basic codecs: 1
Aastra Web UI
Configuration Files aastra.cfg, <mac>.cfg
Enables or disables out-of-band DTMF. Enabling this
parameter forces the IP phone to use out-of-band
DTMF according to RFC2833.
Boolean
1
0 - Disable
1 - Enable
sip out-of-band dtmf: 0
Options->SIP Settings
->RTP Port Base
Advanced Settings->Global SIP
->RTP Settings
Advanced Settings->Global SIP
->RTP Settings
Advanced Settings->Global SIP
->RTP Settings