Appendix A: Configuration Server Protocol Setup
TFTP Server Set-up
There are a number of TFTP servers available. PumpKIN is one of such
TFTP servers. Use the keywords "pumpkin TFTP server" on Google and
you should get the web site where you can download the software
from. Installing PumpKIN is straightforward. To configure the directory
from where you would be serving the files, click on the Options button
on PumpKIN's main window as shown in the following figure.
It is important to select the "Give all files" radio button under the "Read
Request Behavior" category. This makes the files to be served without any
manual intervention when requested.
If you want to prevent users from writing files to the directory select
the "Deny all requests" in the "Write Request Behavior" category. Click
the OK button after you have entered all the required information. All the
firmware files should be in the file system root directory. Currently we
do not support downloads from files present in sub-directories. Consult
PumpKIN's documentation if you need more information on how to set-up
the TFTP server.
IP Phone SIP Admin Guide 185