Rtp, Codec, Dtmf Global Settings - Aastra SIP 53I Administrator's Manual

Configuration Parameters
Operational, Basic, and Advanced Parameters

RTP, Codec, DTMF Global Settings

Global Settings
Parameter –
sip rtp port
RTP Port Base
(in IP Phone UI)
RTP Port
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip use basic codecs
Basic Codecs
(in Web UI)
Description
Format
Default Value
Range
Example
41-001160-00, Release 2.1, Rev 04
IP Phone UI Options->Administrator Menu->
SIP Settings->RTP Port Base
Aastra Web UI Advanced Settings->Global SIP->RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
Indicates the port through which the RTP packets are sent. This value
must specify the beginning of the RTP port range on the gateway or
router.
The RTP port is used for sending DTMF tones and for the audio stream.
Your network administrator may close some ports for security reasons.
You may want to use this parameter to send RTP data using a different
port.
Integer
3000
Not Applicable
sip rtp port: 3000
Aastra Web UI Advanced Settings->Global SIP->RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
Enables or disables basic codecs. Enabling this parameter allows the IP
phone to use the basic Codecs when sending/receiving RTP packets.
Boolean
0
0 - Disable
1 - Enable
sip use basic codecs: 1
A-77