Rtp, Codec, Dtmf Global Settings - Aastra SIP 480I Administrator's Manual

IP Phone Administrator Guide
Operational, Basic, and Advanced Parameters

RTP, Codec, DTMF Global Settings

Parameter –
sip rtp port
RTP Port Base
(in IP Phone UI)
RTP Port
(in Web UI)
Description
Format
Default Value
Range
Example
Parameter –
sip use basic codecs
Basic Codecs
(in Web UI)
Description
Format
Default Value
Range
Example
A-58
IP Phone UI Options->SIP Settings->RTP Port Base
Aastra Web UI Advanced Settings->Global SIP->RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
Indicates the port through which the RTP packets are sent. The RTP
port is used for sending DTMF tones and for the audio stream. Your
network administrator may close some ports for security reasons. You
may want to use this parameter to send RTP data using a different port.
Integer
3000
Not Applicable
sip rtp port: 5000
Aastra Web UI Advanced Settings->Global SIP->RTP Settings
Configuration Files aastra.cfg, <mac>.cfg
Enables or disables basic codecs. Enabling this parameter allows the IP
phone to use the basic Codecs when sending/receiving RTP packets.
Boolean
0
0 - Disable
1 - Enable
sip use basic codecs: 1
41-001129-00 Rev 09, Release 1.4.1