Bluetooth Advertising Settings; Edit Advertising Settings - ZyXEL Communications NWA Series User Manual

11.2 Bluetooth Advertising Settings

The Zyxel Device communicates with another BLE enabled device for advertisements. Use this screen to
configure up to five beacon IDs to be included in the advertising packet.
To access this screen, click Configuration > Bluetooth > Advertising Settings.
Figure 72 Configuration > Bluetooth > Advertising Settings
The following table describes the labels in this screen.
Table 47 Configuration > Bluetooth > Advertising Settings
LABEL
Edit
Activate
Inactivate
#
Status
UUID
Major
Minor
Apply
Reset

11.2.1 Edit Advertising Settings

Select an entry in the Configuration > Bluetooth > Advertising Settings screen and click the Edit icon to
open the Edit Advertising screen. Use this screen to configure the beacon ID in the Bluetooth advertising
packets.
Chapter 11 Bluetooth
DESCRIPTION
Click this to edit the selected entry.
To turn on an entry, select it and click Activate.
To turn off an entry, select it and click Inactivate.
This field is a sequential value, and it is not associated with a specific entry.
This field shows whether or not the entry is activated.
A yellow bulb signifies that this rule is active. A gray bulb signifies that this rule is not active.
This field indicates the UUID to be included in the Bluetooth advertising packets.
This field indicates the major number to be included in the Bluetooth advertising packets.
This field indicates the minor number to be included in the Bluetooth advertising packets.
Click Apply to save your changes back to the Zyxel Device.
Click Reset to return the screen to its last-saved settings.
NWA/WAC/WAX Series User's Guide
120