Nwa1302-Ac - ZyXEL Communications NWA Series User Manual

Table 13 NWA1123-AC PRO LEDs (continued)
LED
Management
WLAN
WLAN
UPLINK
LAN
Locator

3.3.2 NWA1302-AC

By default, the LEDs automatically turn on when the NWA1302-AC is ready. If the LEDs are turned off by
the NCC, you can press the LED ON button for one second to turn on the LEDs again. The LEDs will blink
and turn off after two minutes.
Chapter 3 Hardware
COLOR STATUS
Green On
Slow Blinking (On for 1
sec, Off for 1 sec)
Amber Blinks amber for 1
second and green for
Green
1 second alternatively
Amber Blinks amber and
green alternatively 3
Green
times and then turns
solid green for 3
seconds.
Off
Green On
Amber On
Off
Green On
Amber On
Off
Amber On
Blinking
Green On
Blinking
Off
Amber On
Blinking
Green On
Blinking
Off
White Blinking
Off
NWA/WAC/WAX Series User's Guide
DESCRIPTION
The Zyxel Device is managed by the NCC.
The Zyxel Device is using default wireless settings, or the
Zyxel Device is connected to the NCC but is unregistered
with the NCC.
The Zyxel Device is searching for (discovering) the NCC.
The NCC is connecting to the registered Zyxel Device.
The Zyxel Device is in standalone mode.
The 2.4 GHz radio is set to "Ceiling" and is active
The 2.4 GHz radio is set to "Wall" and is active
The 2.4 GHz WLAN is not active.
The 5 GHz radio is set to "Ceiling" and is active
The 5 GHz radio is set to "Wall" and is active
The 5 GHz WLAN is not active.
The port is operating as a 100 Mbps connection.
The Zyxel Device is sending/receiving data through the port
at 100 Mbps.
The port is operating as a Gigabit connection (1000 Mbps).
The Zyxel Device is sending/receiving data through the port
at 1 Gbps.
The port is not connected.
The port is operating as a 100 Mbps connection.
The LAN port is sending/receiving data at 100 Mbps.
The port is operating as a Gigabit connection (1000 Mbps).
The LAN port is sending/receiving data at 1 Gbps.
The LAN port is not connected.
The Locator is activated and will blink to show the actual
location of the Zyxel Device between several devices in the
network.
The Locator function is off.
44