Delta 36-6023 Manual page 12

E
Attach Support Rod Connection Tube (G) onto the leg assembly from step Figure 2. Secure with M8 x 35mm (1.38"). cap screw (ff)
and nut (dd).
NOTE: The feet Support Rod Connection Tube (G) should face to the outside (left).
Secure Upper Stand Support Part 2 (I2) to Upper Stand Support Part 1 (pre-attached to saw) with M8 x 75 Carriage Screw (ee),
Plastic Spacer (cc), and M8 Locknut (dd).
ASSEMBLY
G
FIGURE 3
FIGURE 4
12
F
ff
dd cc
ee
dd