Lincoln Electric V160-S Service Manual page 97

F-37
DISPLAY BOARD REMOVAL AND REPLACEMENT PROCEDURE
REPLACEMENT PROCEDURE
1. Connect plugs J1 and JP1 to new dis-
play board.
2. Replace the four display board mounting
bolts.
3. Replace control knobs.
4. Replace nuts and associated washers
securing control knobs.
5. Replace previously removed red caps.
TROUBLESHOOTING & REPAIR
(continued)
FIGURE F.21 – BOTTOM OF MACHINE
7 MM CASEFRONT MOUNTING SCREWS
V160-S & -T
6. Replace the 4 mounting screws on either
side of the machine.
7. Replace the three mounting screws on
the bottom of the machine.
8. Replace the case cover.
F-37