Lincoln Electric V160-S Service Manual page 68

F-8
CASE COVER REMOVAL AND REPLACEMENT PROCEDURE (CONTINUED)
PROCEDURE
1. Remove input power to the V160S/T
2. Using a phillips head screwdriver, remove the
four screws on the back. See Figure F.1
3. Pull out the rear panel, take off the handle,
then remove the cover.
4. Perform the
Discharge Procedure detailed in this
Input
section.
TROUBLESHOOTING & REPAIR
FIGURE F.1 – CASE REAR SCREWS - REMOVAL
Filter Capacitor
V160-S & -T
F-8
Four Screws Four Screws