XXIX. Fixing the touch panel
Note:
Perform the steps below only when necessary
(upon your customer's request).
1. Raise the operation panel.
2. Slide the touch panel.
3. Remove the small cover from the back of the
operation panel.
4. Install and tighten the screw as shown to fix the
touch panel to the operation panel.
Note:
• Since the back side of the panel has two types
of shape; Type A and Type B, confirm the
shape of the actual machine and attach the
screw in the hole indicated with the arrow.
• As the screw is not supplied with the machine,
prepare it in advance. (One binding head
screw: V118030803: 3 × 8 mm)
A161IXC051DA
5. Install the small cover removed in step 3.
A161IXC052DA
A161IXC053DA
E-16
Type A
Type B
A2XKIXC029DA