Print Command Language Setting (Pcl Mode) - Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators)

4.3.2 Print Command Language Setting (PCL MODE)

This setting selects print mode.
PCL MODE
[PAUSE]
PCL MODE
[PAUSE]
PCL MODE
[PAUSE]
PCL MODE
[PAUSE]
PCL MODE
[PAUSE]
PCL MODE ESC/POS
[PAUSE]
Notes:
1. When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2. When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3. When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this parameter
setting, repeat mode is enabled and the key pressed is repeatedly entered.
4. The change in the parameter setting becomes effective when the [POWER] key is pressed after
setting, then stored in the backup memory.
TPCL Select to TPCL mode (Factory Default)
TPCL1 Select to TPCL1 mode
Select to LABEL mode
LABEL
RCT Select to RECEIPT mode
Select to RECEIPT1 mode
RCT1
Select to ESC/POS mode
4- 22
4.3 Mode Setting (Printer Operation Mode)
EO13-33005