Parameter Clear (Parameter Clear); Parameter Clear Operation Example - Toshiba B-EP2DL Series System Mode Manual

4. SYSTEM MODE (For Service Persons and System Administrators)

4.8.3 Parameter Clear (PARAMETER CLEAR)

This setting is used for sensitivity adjustment of strip sensor.
Depending on destination (model type), the default value of the LCD language vary.
*** QM TYPE
[PAUSE]
*** JA TYPE
Notes:
1 When the [FEED] key is pressed, the menu moves in the opposite direction from when the [PAUSE]
key is pressed.
2 When the [FEED] and [PAUSE] keys are simultaneously pressed, the display returns to the system
mode menu.
3 When the [FEED] key or [PAUSE] key is pressed for 0.5 seconds or more during this setting, repeat
mode is enabled and the key pressed is repeatedly entered.

4.8.4 Parameter Clear Operation Example

RAM clear for Global model (QM)
PARAMETER CLEAR
[POWER]
*** QM TYPE
[POWER]
*
* *
* * *
* * * * * * * * * * * * * * * *
*** COMPLETE ***
[POWER]
Power OFF
Notes:
1. When "COMPLETE" is displayed after RAM clear is completed, turn off the power. (The power can be
turned off only by using the [POWER] key.)
2. The total label distance covered and sensor adjustment values (system mode <6>) are not cleared by
RAM clear.
***
RAM clear for Global model
*** RAM clear for Japan model
Parameter Clear Mode
RAM clear for the QM type
***
Start of parameter clear
Progress display
Completion of parameter clear
The power is turned off.
4- 70
EO13-33005
4.8 RAM Clear