Toshiba B-EP2DL Series System Mode Manual page 25

3. ONLINE MODE
Continued from the previous page.
CODE AUTO
[POWER]
EURO CODE B0
[POWER]
MAXI CODE B0
[POWER]
AUTO OFF 120min
[POWER]
SLEEP 3sec
[POWER]
LCD OFF 3sec
[POWER]
AUTO HD CHK OFF
[POWER]
HEAD CHECK OFF
[POWER]
HEAD ERR PRT OFF
[POWER]
FEED CHECK OFF
[POWER]
BEEP VOL 1
[POWER]
XML OFF
[POWER]
<3>PARAMETER SET
[POWER]
<1>RESET
[POWER]
ON LINE
Control code setting
Press the [POWER] key.
EURO font code setting
Press the [POWER] key.
MaxiCode specification setting
Press the [POWER] key.
Auto power-off timing setting
Press the [POWER] key.
Power save mode timing setting
Press the [POWER] key.
LCD backlight off timing setting
Press the [POWER] key.
Automatic print head check for broken dots setting
Press the [POWER] key.
Print head check for broken dots after cover close setting
Press the [POWER] key.
Resume printing after broken dots error setting
Press the [POWER] key.
Feed to top of feed after cover close setting
Press the [POWER] key.
Beep volume setting
Press the [POWER] key.
XML setting
Press the [POWER] key.
System mode menu display (Parameter setting)
Press and hold the [POWER] key for at least 3 seconds or more.
The reset menu is displayed.
Press the [POWER] key.
The printer returns to the same state as when the power is turned off and on again.
3- 11
EO13-33005
3.7 Parameter Setting