Flowchart Of Test Print - Toshiba B-EP2DL Series System Mode Manual

5. SYSTEM MODE (For users, availbale menu items are limited)
5.6

Flowchart of Test Print

(1) Normal test print
<4>TEST PRINT
[POWER]
PRINT CONDITION
[PAUSE]
SLANT LINE(1DOT)
[PAUSE]
SLANT LINE(3DOT)
[PAUSE]
CHARACTERS
[PAUSE]
BARCODE
[PAUSE]
NON-PRINTING
[FEED] and [PAUSE]
<4>TEST PRINT
(2) Assembly process test print mode
<4>TEST PRINT
[POWER]
PRINT CONDITION
[PAUSE]
FACTORY TEST
[POWER]
AUTO PRINT(TRAN)
[POWER]
AUTO PRINT(REFL)
[POWER]
PROCESS PRINT
[FEED] and [PAUSE]
<4>TEST PRINT
Test print condition parameter setting mode
Refer to Section 4.6
1-dot slant line print mode
Refer to Section 4.6
3-dot slant line print mode
Refer to Section 4.6
Character print mode
Refer to Section 4.6
Bar code print mode
Refer to Section 4.6
No printing mode
Refer to Section 4.6
While holding down the [FEED] key, press the [PAUSE] key.
Test print condition parameter setting mode
Refer to Section 4.6
Press the [PAUSE] key six time.
Refer to Section 4.6
Assembly process test line print mode
Refer to Section 4.6
Assembly process automatic print mode (Transmissive sensor, Feed Gap)
Refer to Section 4.6
Assembly process automatic print mode (Reflective sensor, Black mark)
Refer to Section 4.6
Assembly process test pattern print mode
Refer to Section 4.6
While holding down the [FEED] key, press the [PAUSE] key.
5- 5
EO13-33005
5.6 Flowchart of Test Print