ENGINE TIMING TOOL KIT
- VAUXHALL & OPEL 16V 1.6 & 1.8
WARNING! Incorrect or out of phase engine timing can result in damage to the valves.
The Tool Connection cannot be held responsible for any damage caused by using these
tools in anyway.
Safety Precautions - Please read
If the engine has been identified as an Interference engine, damage to the engine will
occur if the timing belt has been damaged. A compression check of all the cylinders should
be taken before the cylinder head(s) are removed.
Do not turn crankshaft or camshaft when the timing belt has been removed.
To make turning the engine easier, remove the spark plugs.
Observe all tightening torques.
Do not turn the engine using the camshaft or any other sprocket.
Disconnect the battery earth lead(Check Radio code is available).
Do not use cleaning fluids on belts, sprockets or rollers.
Some toothed timing belts are not interchangeable. Check the replacement belt has the
correct tooth profile.
Always mark the belt with the direction of running before removal.
Do not lever or force the belt onto its sprockets
Check the ignition timing after the belt has been replaced.
Do not use timing pins to lock the engine when slackening or tightening the crankshaft
pulley bolts.
ALWAYS REFER TO A REPUTABLE MANUFACTURERS WORKSHOP MANUAL
CANNON TOOLS LTD
Add: 20 station road, Rowley Regis, west midlands,B65 0JU.U.K.
CT3766
PLAN LAYOUT
B
D
E
APPLICATIONS
The application list for this product has been compiled cross referencing the OEM Tool
Code with the Component Code.
In most cases the tools are specific to this type of engine and are necessary for Cam belt or
chain maintenance.
If the engine has been identified as an interference engine valve to piston damage will
occur if the engine is run with a broken Cam belt.
A compression check of all cylinders should be performed before removing the cylinder
head.
Always consult a suitable work shop manual before attempting to change the Cam belt or
Chain.
The use of these engine timing tools is purely down to the user's discretion and
CANNONTOOLS cannot be held responsible for any damage caused what so ever.
ALWAYS USE A REPUTABLE WORKSHOP MANUAL
A
B
F
C
www.cannontools.co.uk