Radius Settings - ATEN RCM101D User Manual

RCM101D User Manual
Authentication
The RCM101D allows log in authentication and authorization through external
programs.
This screen lets you configure the RADIUS and LDAP settings.
If you want to use a RADIUS or LDAP instead of the RCM101D device
authentication, check Disable Device Authentication. Selecting this option
will disable login authentication locally on the RCM101D.
If the third party authentication server/external program you are using fails to
authenticate and you cannot log on to the RCM101D, you can enable local
authentication through the local console. See page 112 for details on how to use
the local console to enable authentication on the RCM101D.

RADIUS Settings

To allow authentication and authorization for the RCM101D through a
RADIUS server, do the following:
1. Check Enable.
2. Fill in the IP addresses and service port numbers for the Preferred and
Alternate RADIUS servers.
3. In the Timeout field, set the time in seconds that the RCM101D waits for a
RADIUS server reply before it times out.
4. In the Retries field, set the number of allowed RADIUS retries.
5. In the Shared Secret field, key in the character string that you want to use
for authentication between the RCM101D and the RADIUS Server.
40