[Default Picture Mode] - Panasonic PT-MZ16K Operating Instructions Manual

[DEFAULT PICTURE MODE]

Set the picture mode to be applied when a new signal is input. The setting in the [PICTURE] menu → [PICTURE
MODE] will switch according to the setting.
1) Press as to select [DEFAULT PICTURE MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[STANDARD]
[CINEMA]
[NATURAL]
[REC709]
[DICOM SIM.]
[DYNAMIC]
[GRAPHIC]
Note
f The following are the conditions where the setting in the [PICTURE] menu → [PICTURE MODE] is switched to the picture mode set in
[DEFAULT PICTURE MODE].
g When a new signal is input
g When the deleted signal is input again after the registered signal has been deleted
g When the <DEFAULT> button is pressed while the [PICTURE] menu → [PICTURE MODE] is selected
g When there is no input signal
Chapter 4 Settings — [PICTURE] menu
Set [PICTURE MODE] to [GRAPHIC] when a still image signal is input or [STANDARD] when a
moving image signal is input.
Set [PICTURE MODE] to [STANDARD].
Set [PICTURE MODE] to [CINEMA].
Set [PICTURE MODE] to [NATURAL].
Set [PICTURE MODE] to [REC709].
Set [PICTURE MODE] to [DICOM SIM.].
Set [PICTURE MODE] to [DYNAMIC].
Set [PICTURE MODE] to [GRAPHIC].
ENGLISH - 87