[Default Picture Mode]; Srgb-Compliant Video - Panasonic PT-RZ120LBU7 Operating Instructions Manual

2) Press the <ENTER> button.
3) Press as to select a system format.
f Available system formats vary depending on the input signal.
Terminal
<RGB 1 IN> terminal, <RGB 2
IN> terminal
<DVI-D IN> terminal
<HDMI IN> terminal, <DIGITAL
LINK/LAN> terminal
4) Press the <ENTER> button.
Note
f For details of the types of video signals that can be used with the projector, refer to "List of compatible signals" (x page 206).
f This may not function properly for some connected external devices.
f For the SDI input, the signal format can be set in detail in the [DISPLAY OPTION] menu → [SDI IN].

[DEFAULT PICTURE MODE]

Set the picture mode to be applied when a new signal is input. The setting in the [PICTURE] menu → [PICTURE
MODE] will switch according to the setting.
1) Press as to select [DEFAULT PICTURE MODE].
2) Press qw to switch the item.
f The items will switch each time you press the button.
[AUTO]
[STANDARD]
[CINEMA]
[NATURAL]
[REC709]
[DICOM SIM.]
[DYNAMIC]
[GRAPHIC]
Note
f The following are the conditions where the setting in the [PICTURE] menu → [PICTURE MODE] is switched to the picture mode set in
[DEFAULT PICTURE MODE].
g When a new signal is input
g When the deleted signal is input again after the registered signal has been deleted
g When the <DEFAULT> button is pressed while the [PICTURE] menu → [PICTURE MODE] is selected
g When there is no input signal

sRGB-compliant video

sRGB is an international standard (IEC61966-2-1) for color reproduction defined by IEC (International
Electrotechnical Commission).
Set according to the following steps to reproduce more faithful, sRGB compliant colors.
1) Set [COLOR MATCHING] to [OFF].
f Refer to [COLOR MATCHING] (x page 105).
2) Display the [PICTURE] menu.
f Refer to "[PICTURE] menu" (x page 82).
Chapter 4 Settings — [PICTURE] menu
480/60i, 576/50i, or 576/50p
signal
640 x 480/60 or 480/60p
signal
Other moving image signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other moving image signals
480/60i, 576/50i, 480/60p, or
576/50p signal
Other moving image signals
Set [PICTURE MODE] to [GRAPHIC] when a still image signal is input or [STANDARD] when a
moving image signal is input.
Set [PICTURE MODE] to [STANDARD].
Set [PICTURE MODE] to [CINEMA].
Set [PICTURE MODE] to [NATURAL].
Set [PICTURE MODE] to [REC709].
Set [PICTURE MODE] to [DICOM SIM.].
Set [PICTURE MODE] to [DYNAMIC].
Set [PICTURE MODE] to [GRAPHIC].
System format
Select [RGB] or [YC C ].
B R
Select an item from [640x480/60], [480/60p YC
RGB].
Select [RGB] or [YP P ].
B R
Select [RGB] or [YC C ].
B R
Select [RGB] or [YP P ].
B R
Select [AUTO], [RGB], or [YC C
B
Select [AUTO], [RGB], or [YP P
B
C ], or [480/60p
B R
].
R
].
R
ENGLISH - 89