[Info Monitor Setting] - Panasonic PT-MZ16K Operating Instructions Manual

[UPGRADE KIT]
[OPERATING MODE]
[NORMAL]
[QUIET]
[USER1]
[USER2]
[USER3]
[SIGNAL INFORMATION]
*1 The temperature status is indicated with text color (green/yellow/red) and bar scale. Use the projector within the range that the indication is
green.
Note
f E-mail containing the status can be sent to the E-mail address (up to two addresses) set in "[E-mail set up] page" (x page 178) by
pressing the <ENTER> button while the [STATUS] screen is displayed.
f Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
f If any abnormality has occurred on the projector, press the <DEFAULT> button while the [STATUS] screen is displayed to display the detail
screen of the error information.
f For details on the contents displayed in [SELF TEST], refer to "[SELF TEST] indications" (x page 211).
Sending status content via E-mail
The status content can be sent to the E-mail address (up to two addresses) set in "[E-mail set up] page"
(x page 178).
1) Press the <ENTER> button while the 1/5 to 4/5 page of the [STATUS] screen is displayed.
f The [SELECT E-MAIL ADDRESS] screen is displayed.
2) Press as to select the destination.
3) Press the <ENTER> button.
f The confirmation screen is displayed.
4) Press qw to select [OK], and press the <ENTER> button.
f The status content is sent.

[INFO MONITOR SETTING]

Set the information monitor of the control panel.
142 - ENGLISH
Chapter 4 Settings — [PROJECTOR SETUP] menu
[ET-UK20]
[ET-CUK10]
[ET-NUK10]
Displays the setting value of the [PROJECTOR SETUP] menu → [OPERATION SETTING] →
[OPERATING MODE].
Displays the runtime of the light source with [OPERATING MODE] set to [NORMAL].
Displays the runtime of the light source with [OPERATING MODE] set to [QUIET].
Displays the runtime of the light source with [OPERATING MODE] set to [USER1].
Displays the runtime of the light source with [OPERATING MODE] set to [USER2].
Displays the runtime of the light source with [OPERATING MODE] set to [USER3].
[INPUT]
[SIGNAL FORMAT]
[SIGNAL FREQUENCY]
[SYNC.STATE]
[V.SYNC WIDTH]
[SCAN TYPE]
[TOTAL DOTS]
[DISPLAY DOTS]
[TOTAL LINES]
[DISPLAY LINES]
[SAMPLING]
[SIGNAL LEVEL]
[BIT DEPTH]
[HDCP STATUS]
Displays the activation status by the Upgrade Kit (Model No.:
ET-UK20).
Displays the activation status by the Auto Screen Adjustment
Upgrade Kit (Model No.: ET-CUK10).
Displays the activation status by the NFC Upgrade Kit (Model No.:
ET-NUK10).
Or, displays the status of the NFC function.
[ACTIVATED]: The NFC function can be used.
[NOT ACTIVATED]: The NFC function cannot be used.
Displays the input terminal used for the projected image.
Displays the format of the input signal.
Displays the frequency of the input signal.
Displays the sync polarity of the input signal.
Displays the vertical sync signal pulse width of the input signal.
Displays the scan type of the input signal.
Displays the total dot count of the input signal.
Displays the number of input signal display dots.
Displays the total line count of the input signal.
Displays the number of input signal display lines.
Displays the sampling information and the color format of the input
signal.
Displays the signal level of the input signal.
Displays the gradation of the input signal.
Displays the HDCP status of the input signal. The content of display
is as follows.
[HDCP2.2]: When protected with HDCP 2.2
[HDCP1.X]: When protected with HDCP 1.X
[NONE]: When not protected with HDCP