[Info Monitor Setting] - Panasonic PT-MZ10K Operating Instructions Manual

Note
f E-mail containing the status can be sent to the E-mail address (up to two addresses) set in "[E-mail set up] page" (x page 181) by
pressing the <ENTER> button while the [STATUS] screen is displayed.
f Some items in [SIGNAL INFORMATION] may be displayed and others not displayed, depending on the signal being input.
f If any abnormality has occurred on the projector, press the <DEFAULT> button while the [STATUS] screen is displayed to display the detail
screen of the error information.
f For details on the contents displayed in [SELF TEST], refer to "[SELF TEST] indications" (x page 214).
Sending status content via E-mail
The status content can be sent to the E-mail address (up to two addresses) set in "[E-mail set up] page"
(x page 181).
1) Press the <ENTER> button while the 1/5 to 4/5 page of the [STATUS] screen is displayed.
f The [SELECT E-MAIL ADDRESS] screen is displayed.
2) Press as to select the destination.
3) Press the <ENTER> button.
f The confirmation screen is displayed.
4) Press qw to select [OK], and press the <ENTER> button.
f The status content is sent.

[INFO MONITOR SETTING]

Set the information monitor of the control panel.
For operation of the information monitor, refer to "Using the information monitor function" (x page 189).
Setting the display during normal status
Display/hide the information monitor during no operation.
1) Press as to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f The [INFO MONITOR SETTING] screen is displayed.
3) Press as to select [DEFAULT].
4) Press qw to switch the item.
f The items will switch each time you press the button.
[OFF]
[USER VIEW]
Note
f Even if [DEFAULT] is set to [OFF], the content of an error or a warning is automatically displayed when it occurs.
f This can also be set with operation in the information monitor. For details, refer to "Using the information monitor function" (x page 189).
Setting the information to display
Set the items to display on the information monitor during no operation.
1) Press as to select [INFO MONITOR SETTING].
2) Press the <ENTER> button.
f The [INFO MONITOR SETTING] screen is displayed.
3) Press as to select [USER VIEW].
4) Press the <ENTER> button.
f The [USER VIEW] screen is displayed.
5) Press as to select each item.
Chapter 4 Settings — [PROJECTOR SETUP] menu
Does not display the information.
Displays the items set in the [PROJECTOR SETUP] menu → [INFO MONITOR SETTING] → [USER
VIEW].
ENGLISH - 145