Flying Upgrade; Rigging - Martin Audio MLA User Manual

MLA System
USER GUIDE
In common with MLA Compact, the MLX features a bright LED on the front grill which can be illuminated via Vu-Net software to
identify its location on the U-Net network, to ensure complete compatibility when an DSX is used rear-facing, there is also an
LED on the rear of the enclosure, the choice of whether front or rear LED lights is made in Vu-Net.

Flying Upgrade

An upgrade kit is available to convert a DSX to a DSX-F. The principal addition is a pair of end cheeks with the flying brackets
attached; these are quickly and easily fitted with eight M10 bolts. A wheelboard is also supplied but without castors. The castors
on the rear of the DSX are unbolted and attached to the wheelboard which may then be used on with the front or the rear of
the cabinet so it may travel face down or face up, entirely your choice. Finally, a new canvas cover is supplied which is slightly
larger than the DSX cover so it will fit the greater width resulting from the end cheeks. This cover is fitted with a strong timber
insert to protect the upper surface of the cabinet (front or back) when it is in transit on its wheelboard.

Rigging

DSX-F rigging is identical to the MLX rigging system. The rigging is entirely symmetrical front to back to make it easy to fly cabinets
facing backwards when creating flown cardioid arrays. As there is no requirement for multiple angles each rigging bar on all four
corners at the bottom of the cabinet are relatively short with a single hole to locate into either the DSX below it or into the MLA
flying grid for combination flown arrays;-
MLA System User Guide V2.1
78