Martin Audio MLA User Manual page 347

MLA System
USER GUIDE
Note that you cannot freely change the ganging channel when using Whole Channel ganging of outputs and inputs. The channel
is determined by the base channel to which everything is ganged. Therefore anything ganged to channel 1 will be coloured red,
anything ganged to channel 2 will be coloured green, channel 3 light blue and so on.
You can also remove all ganging by using the 'Clear' button for both output or input ganging;-
This will bring up a warning window to make sure that you definitely want to clear all gangs;-
Click 'Yes' and all ganging is completely removed.
Output Part Ganging
It is also possible to gang individual parameters between channels. Note that you can only gang the same parameters together
between channels, for example some or all of the output channel high pass filters or all of Parametric EQ 2. You cannot gang
dissimilar parameters; as shown in the ganging window diagram, part ganging only works in vertical columns;-
There are 10 channels of ganging available for each output parameter and 4 for the input parameters as signified by the coloured
squares at the top of each part ganging section;-
MLA System User Guide V2.1
347