Zone Ganging - Martin Audio MLA User Manual

MLA System
USER GUIDE
The filters are also available for you to exclude any of the parameters shown from ganging. A typical example might be to gang
everything other than mute so you can ensure that arrays are matched left and right but have the ability to mute them
independently, useful during set-up. All parameters are included by default so click one any you wish to exclude. Here we have
removed Mute from the ganging for both main and side arrays;-

Zone Ganging

To select Zone ganging click on the ZONE GANGING button. If you have already used array ganging you will see the following
window;-
As previously mentioned, Array and Zone ganging cannot reside together so if you are happy to clear any previously ganged
arrays click 'Yes'.
Zones are ganged in exactly the same way by first selecting a group and then clicking on the required zone. Ganging can run
across the zones of all arrays or just across some. In this example we have ganged all of zone 1 (the MSX sub) with Zone 2 of the
main arrays also ganged but independently ganged zone 2 of the side arrays. Zone 3 is ganged across all four arrays and finally
zone 4 on the main arrays have also been ganged (the side hangs do not have a fourth zone). We have excluded Mute from the
ganging of all four arrays;-
MLA System User Guide V2.1
299