Table of Contents
Advertisement
Note:
For each decal, peel off the backing
and squeegee across the surface of the decal,
starting at the center of the decal and working
toward the edges, using overlapping strokes.
A.
Install decal 106-6754 onto the hood as
shown in
Figure
Figure 10
1. Decal 106-6754
2. Hood
B.
Using the tables in
and Angle Decals (page
correct sound-power-rating portion of decal
138-8200 for your machine and apply it to
the existing regulatory decal near the left
motion-control lever.
C.
Apply the CE portion of the decal wherever
there is space near the regulatory decal
(Figure
11).
D.
Using the tables in
Angle Decals (page
tipping-hazard decal for your machine and
place it over the existing tipping-hazard
warning as shown in
10.
g004789
3. Lock assembly
4. Decal location
Selecting the Sound
11), select the
(Figure
11).
Selecting the Sound and
11), select the correct
Figure
12.
1. Regulatory decal (CE
portion)
1. Decal 138-8202
2. Existing decal
10
Figure 11
2. Decal 138-8200
Figure 12
3. Install the correct
tipping-hazard warning
at this location over the
existing decal.
g285042
g004790
Advertisement
Table of Contents
