Connections - Panasonic External Presentation unit 1728 Technical Description

Panasonic Electric Works Nordic AB
MEW01297 Rev: 2
14
Figure 4. The ext. Presentation unit 1728 connections to the terminal block "J1".
The jumper "JP8" must only be shunted if the unit is the last unit on the line.
NOTE!
In EBL128: +24 V / 0V / S0 / S1 to terminal block J1: 13 / 14 / 15 / 16.
In EBL512 G3: +24 V / 0V / S0 / S1 to terminal block J4: 35 / 36 / 37 / 38.
Figure 5. The ext. Presentation unit 1728 p.c.b. Position of the terminal block
"J1", the jumper "JP8", etc.
Technical Description External Presentation Unit 1728, ver. 1.4.x

Connections

The ext. Presentation unit is equipped with a plug-in terminal block
(J1:1-8) for the cable connections. Up to 1.5 mm
be used.
J1
29
2
conductor area can
EBL512