Connections - Panasonic 1735 Technical Description

Panasonic Electric Works Nordic AB
MEW01295 Rev: 2
13
Figure 6. The Alert Annunciation units 1735 & 1736 connections to the terminal
block "J1". The jumper "JP8" only has to be on place (shunted) if the unit is the
last unit on the line. NOTE! The AA units 1735 & 1736 can in EBL512 only be
connected to a 1587 board (not 1582).
In EBL128: +24 V / 0V / S0 / S1 to terminal block J1: 13 / 14 / 15 / 16.
In EBL512 G3: +24 V / 0V / S0 / S1 to terminal block J4: 35 / 36 / 37 / 38.
Figure 7. The Alert Annunciation units 1735 & 1736 main board p.c.b. Position
of the terminal block "J1", the jumper "JP8", etc.
Technical Description Alert Annunciation Units 1735 & 1736, ver. 1.4.x

Connections

The AA units 1735 & 1736 main board is equipped with a plug-in
terminal block (J1:1-8) for the cable connections. Up to 1.5 mm
conductor area can be used.
J1
31
2
EBL512