Panasonic External Presentation unit 1728 Technical Description page 12

Panasonic Electric Works Nordic AB
MEW01297 Rev: 2
LED indicator
L1 Fire (Brand)
L2 Alarms queued
(Flera larm)
L3 Extinguishing
(Släckanläggning
aktiverad)
Ventilation
L4
(Brandventilation
aktiverad)
L5 Fire brigade tx
(Larmsändare
aktiverad)
L6 Operation (Drift)
Technical Description External Presentation Unit 1728, ver. 1.4.x
Table of LED indicators:
Colour Indicating
2 x Red Blinking+
Buzzer
(interm.)
2 x Red Blinking
Red Cont.
Yellow Cont.
Red Cont.
Green Cont.
NOTE! Regarding "L2", see also chapter "SW mode & Address
setting, page 12.
3
Co-incidence alarms =
4
Indicating the same way, as in the c.i.e. the Presentation unit is connected
to, i.e. by activated output(s) of the corresponding type alternatively an
activated input for the LED respectively.
Fire alarm. (Also indicating heavy
smoke / heat alarm the same way as in
the c.i.e.)
More than one alarm
and co-incidence alarms)
button "P1" (Alarms queued) to scroll.
Outputs for Extinguishing equipment are
4
activated.
Outputs for (fire / smoke) ventilation
equipment are activated.
Output(s) for fire brigade tx (routing
equipment) is/are activated.
24 V DC is connected and the
communication with the c.i.e. is working
normally, i.e. the Ext. Presentation unit
is in operation.
2-zone / address dependence.
10
(also pre-warning
3
. Use push
4
4