Panasonic External Presentation unit 1728 Technical Description page 22

Panasonic Electric Works Nordic AB
MEW01297 Rev: 2 Technical Description External Presentation Unit 1728, ver. 1.4.x
If there is an SSD (Site Specific Data) memory fault or no SSD
downloaded, there will be a fault message in the display:
"SSD memory fault"
The ext. Presentation unit will work since the alarm texts will be sent
out from the c.i.e.
There will also be a fault message in the c.i.e.:
In system EBL512:
"FAULT: SSD, EPU xx, 1587 board x, CU xx".
In system EBL128:
"FAULT: Site specific data (SSD), EPU x"
In system EBL512 G3:
"FAULT: Site specific data, external presentation
unit xx, control unit xx"
20