Tilt Lock Mechanism; Tilt Support Knob; Cowling Lock Lever; Flushing Device - Yamaha F30 Owner's Manual

Components
Bolt tightening torque:
18 N·m (1.8 kgf·m, 13 lb·ft)
EMU26313

Tilt lock mechanism

The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
1
1. Tilt lock lever
To lock it, set the tilt lock lever in the "
(lock) position. To release, push the tilt lock
lever in the " " (release) position.
EMU26323

Tilt support knob

To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.
ECM00661
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
34
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be
trailered in the normal running position,
use an additional support device to se-
cure it in the tilt position.
EMU39264

Cowling lock lever

The cowling lock lever(s) is used to secure
the top cowling.
ZMU06395
"
1. Cowling lock lever(s)
EMU26464

Flushing device

This device is used to clean the cooling wa-
ter passages of the motor using a garden
hose and tap water.
ZMU06396
1. Flushing device
TIP:
For details on usage, see page 79.
1
1
ZMU08532
ZMU06398