Procedure For Tilting Up (Power Trim And Tilt Models) - Yamaha F30 Owner's Manual

Operation
shake loose from the tilt support and
fall. If the motor cannot be trailered in
the normal running position, use an
additional support device to secure it
in the tilt position. For more detailed
information, see page 75.
EMU44590
Procedure for tilting up (power trim
and tilt models)
1. Place the remote control lever / gear
shift lever in neutral.
N
70
2.
[ECM01642]
ZMU06396
ZMU03196
3.
Press the power trim and tilt switch "
(up) until the outboard motor has tilted
up completely.
UP
Push the tilt support knob into the clamp
bracket to support
WARNING! After tilting the outboard
motor, be sure to support it with the
tilt support knob or tilt support lever.
Otherwise the outboard motor could
fall back down suddenly if oil in the
"
ZMU01787
UP
ZMU06407
the engine.