Components
3. Cap
A
1
2
1. Trim tab
2. Bolt
Bolt tightening torque:
F40D, F50F, F60C 18.0 Nm
(1.8 kgf-m, 13 ft-lb)
F40G, FT50G, FT60D, F70A 37.0 Nm
(3.7 kgf-m, 27 ft-lb)
EMU26262
Trim rod (tilt pin)
The position of the trim rod determines the
minimum trim angle of the outboard motor in
relation to the transom.
EMU26312
Tilt lock mechanism
The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
28
B
ZMU03097
ZMU03593
1
1. Tilt lock lever
To lock it, set the tilt lock lever in the "
(lock) position. To release, push the tilt lock
lever in the " " (release) position.
EMU34461
Tilt support lever for power trim and
tilt or hydro tilt model
To keep the outboard motor in the tilted up
position, lock the tilt support lever to the
clamp bracket.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
port and fall. If the motor cannot be trail-
ered in the normal running position, use
an additional support device to secure it
in the tilt position.
ZMU03594
"
ZMU03595