Trim Rod (Tilt Pin); Tilt Lock Mechanism; Tilt Support Knob - Yamaha F20G Owner's Manual

the starboard side "B" in the figure.
ECM00841
The trim tab also serves as an anode to
protect the engine from electrochemical
corrosion. Never paint the trim tab as it
will become ineffective as an anode.
1
A
B
2
1. Trim tab
2. Bolt
Bolt tightening torque:
18 N·m (1.8 kgf·m, 13 lb·ft)
EMU26263

Trim rod (tilt pin)

The position of the trim rod determines the
minimum trim angle of the outboard motor in
relation to the transom.
1
1. Trim rod
ZMU08733
1
ZMU08765
EMU47200

Tilt lock mechanism

The tilt lock mechanism is used to prevent
the outboard motor from lifting out of the wa-
ter when in reverse gear.
1. Tilt lock lever
To release the lock, pull up the tilt lock lever
in the " " (release) position.
EMU26323

Tilt support knob

To keep the outboard motor in the tilted up
position, push the tilt support knob under the
swivel bracket.
1
1. Tilt support knob
ECM00661
Do not use the tilt support lever or knob
when trailering the boat. The outboard
motor could shake loose from the tilt sup-
Components
1
ZMU08735
ZMU08736
29