Tilt Lock Mechanism; Tilt Support Knob; Tilt Support Bar; Power Tilt Unit - Yamaha F9.9J Owner's Manual

EMU30530

Tilt lock mechanism

The tilt lock mechanism is used to prevent the
outboard motor from lifting out of the water
when in reverse gear.
1. Tilt lock lever
To lock it, set the tilt lock lever in the lock po-
sition. To release, push the tilt lock lever in the
release position.
EMU26321

Tilt support knob

To keep the outboard motor in the tilted up po-
sition, push the tilt support knob under the
swivel bracket.
ECM00660
NOTICE
Do not use the tilt support lever or knob
when trailering the boat. The outboard mo-
tor could shake loose from the tilt support
and fall. If the motor cannot be trailered in
the normal running position, use an addi-
tional support device to secure it in the tilt
position.
EMU26333

Tilt support bar

The tilt support bar keeps the outboard motor
in the tilted up position.
1
ZMU07814
ECM01660
NOTICE
Do not use the tilt support bar when traile-
ring the boat. The outboard motor could
shake loose from the tilt support and fall.
If the motor cannot be trailered in the nor-
mal running position, use an additional
support device to secure it in the tilt posi-
tion.
EMU26361

Power tilt unit

This unit tilts the outboard motor up and down
and is controlled with the power tilt switch.
ECM00630
NOTICE
Do not step on or exert pressure on the
power tilt motor. The power tilt unit could
be damaged as a result.
Components
25