Table of Contents
Advertisement
3. Connect iSCAN to your computer or an AC or DC USB power adapter
using the supplied USB cable. The battery icon indicates the batteries
are being charged. When
charged. High-capacity batteries may take up to 16 hours to charge. You
cannot use the iSCAN while charging.
b
Battery Notes:
•
Use only fresh batteries of the required size and type. Do not mix old
and new batteries, different battery types (alkaline or rechargeable), or
rechargeable batteries of different capacities.
•
Dispose of batteries promptly and properly; do not burn or bury them.
•
For long-term storage (a month or longer), remove the batteries. Batteries
can leak chemicals that can damage electronic parts.
•
Do not overcharge rechargeable batteries. Overcharging shortens
battery life.
Recycle Rechargeable Batteries
Placing rechargeable batteries in the trash can be harmful to the environment.
Instead, recycle old rechargeable batteries at your local RadioShack store free
of charge. RadioShack participates in the RBRC
and is committed to preserving the environment and conserving natural
resources. Call 1-800-THE-SHACK (1-800-843-7422) for more information.
Attaching the Belt Clip
Align the belt clip grooves to the slots on the back of iScan. Slide the clip
down until it clicks in place. To remove the belt clip, pull back on the small
tab and slide the clip upward.
Turn on iSCAN and Set Squelch
1. Press and hold
2. Turn SQUELCH to the midpoint (12 o'clock) position.
2000018.UG.031011.indd 7
replaces
. Release when iSCAN turns on.
Squelch
Higher squelch for stronger signals.
•
Lower squelch for weaker signals.
•
Press and hold to turn iSCAN on and off
•
Press briefly to toggle the backlight
•
7
, the batteries are fully
battery recycling program,
©
3/10/2011 11:06:53 AM
Hide quick links:
Advertisement
Table of Contents
