Search Settings - Radio Shack iSCAN PRO-18 User Manual

Search Settings

To change search settings, press MENU while searching.
Attenuator
Zeromatic
Delay
Special Mode
Lo
Hi
Frequency
Ranges
Rx Mode
Saving Found CTCSS or DCS Codes
When importing objects from the Library, CTCSS and DCS code information
from the RadioReference database is automatically imported with the
conventional channel information. In cases where the squelch code (CTCSS
or DCS subaudible) for a conventional radio channel is not included in the
RadioReference database, your iSCAN can quickly identify the code, if one
is present.
When a conventional channel includes a CTCSS or DCS code, the code
appears on the bottom line of the display, followed by an "S", which
indicates a valid CTCSS or DCS code:
CTCSS 127.3 S
2000018.UG.031011.indd 18
Limits iSCAN's effective range, which may help reduce
interference from strong local transmitters.
Helps iSCAN tune to exact frequencies when searching.
How long iSCAN waits after a transmission before resuming.
Signal Stalker II skips any 1 MHz block where you have
skipped five or more frequencies. Special Mode is useful
when you are close to many high power transmitters that
are close together in frequency.
Sets the lowest frequency for the search range.
Sets the upper frequency for the search range.
Disabling some frequency ranges speeds up the search.
Set the RX modulation mode to automatic, or forces AM
mode or FM mode. RX Mode functions in Aircraft and
 or 
Amateur bands, Press
18 18
to change.
3/10/2011 11:06:58 AM