Radio Shack iSCAN PRO-18 User Manual page 25

Show VC/CC
Show TGID
Show Site Name
CONV TGID
CONV Radio ID
PC/IF CCDump
to file
Low Batt Time
Charge Time
TG Disp
M36 Stat Bits
EncMode
EncLevel
DSPLevelAdapt
ADC Gain
DAC Gain
2000018.UG.031011.indd 25
Voice channel and control channel displays. Simple
Display must be unchecked. Show Radio ID will over-
ride if a Radio ID is available.
Controls talkgroup ID display. Simple Display must be
unchecked.
Controls trunking site name display only if two or more
trunking system sites are programmed. Simple Display
must be unchecked.
Displays the talkgroup ID for P25 conventional talk-
group calls. Simple Display must be unchecked.
Displays the radio ID for P25 conventional calls. Simple
Display must be unchecked.
Streams ASCII Control Channel Dump data over the
USB interface for trunking control channels.
Stores ASCII Control Channel Dump data to the
microSD card for trunking control channels.
Interval (seconds) between low-battery alert sounds.
Sets the charge time for the built-in radio charger.
Sets the display format for talkgroup IDs.
Uses status bits to track Motorola 3600 baud trunking
talkgroup calls.
Selects how the radio treats encrypted voice calls.
"Noise" plays the random undecoded encryption
noise. "Silent" plays no audio during the call. "Tone"
plays a soft tone for the duration of the call.
Selects the tone level for encrypted calls.
Controls how fast the DSP adjusts to varying P25 levels
(default: 64). Higher values = faster rates.
Controls input signal to CODEC (default: +0dB).
Sets output signal from CODEC, varying the audio
level of decoded digital signals (default: +0dB).
25
3/10/2011 11:06:59 AM