Table of Contents
Advertisement
Assembling the neat seam beginning (NSB)
Fig. 17: Assembling the NSB into the machine (5)
15. Connect the connectors and hoses on the valve block.
• Valve block Festo:
• Valve block Bürkert:
16. Lay the hoses under the machine and route them to the NSB.
17. Swivel up the machine head.
Additional Instructions 911 - 00.0 - 05/2020
Valve block Festo
X461
X463
• Connector X461 + gray hose
• Connector X462 + green and yellow hose
• Connector X463 + red and blue hose
• The positions of the valves on the valve block are fixed.
• Position 11: gray hose
• Position 12: green and yellow hose
• Position 13: red and blue hose
While doing so, make sure not to pinch any hoses.
Valve block Bürkert
X462
12
13
11
19
Advertisement
Table of Contents
